What are flares?
Flares are important safety devices used in refineries and petrochemical facilities. They safely burn excess hydrocarbon gases which cannot be recovered or recycled. Excess hydrocarbon gases are burnt in the flare systems in an environmentally-sound manner, as an alternative to releasing the vapour directly into the atmosphere.
During flaring, excess gases are combined with steam and/or air, and burnt off in the flare system to produce water vapour and carbon dioxide. The process of burning these excess gases is similar to the burning of liquefied petroleum gases (LPG), which some of us use as fuel for home cooking.
The use of flares is minimised to the extent that is possible. However, flaring can occur during a start-up and shut-down of any of our facilities for maintenance, and also during unplanned operational interruptions such as power outages.
When there is flaring at our facilities, we follow established guidelines to promptly inform our neighbouring companies and Government agencies such as the National Environmental Agency (NEA) and the Singapore Civil Defence Force (SCDF).
There are generally two types of flares that we use at our Singapore manufacturing facilities:
- Elevated flares, where the flare tip is between 20 to 150 meters above ground.
- Ground flares, where the flare tip is about two to three meters above ground, which is fenced off with a high heat-shield fencing, which also acts as a safety zone.
What can sometimes be seen or heard in instances of flaring?
A flame or a glow:
- Members of the public may become concerned when they see flaring and mistake them for fires.
- The elevated flare presents itself as a flame.
- The ground flare is not visible in the day. At night, it may cast an orange glow in the night sky, depending on cloud cover.
- Sometimes, a white cloud may be observed around the flare. It is actually steam that is injected into the flare system to support clean combustion.
- While we strive to achieve smokeless flaring, it may not always be possible during operational situations.
- On some occasions, there may be black smoke from the flare.
- The smoke, which is mainly made up of carbon particles, occurs when there is insufficient amount of air to support a complete combustion. This may happen when there is a sudden release of excess gases to the system with a delay in response before sufficient steam can be supplied to the burning process.
- Steam is usually added to the gases to increase turbulence in the gas flow. This increases air intake that helps to achieve complete combustion and smokeless flaring.
- Flaring may produce a rumbling noise. It may sound like thunder.
- This is due to the turbulent mixing of gases, air and steam. The sound is similar to what you hear when you fan a campfire, and oxygen is mixed with the flame.
ExxonMobil is committed to ensuring that our operations run safely and with minimal impact on the community and the environment. We strive to minimise flaring, keeping it to the times that it is necessary for the continued safe operations of our plants.
When you see flaring, please be assured that flares play a key role in keeping refineries and chemical plants running safely.
Lubricant PlantUpgrades the value of the molecules to create useful lubricant products for consumers.
Who we are Article •
Our history in SingaporeOur business presence has grown since 1893 as we continue to invest in technologies and assets in Singapore.
Who we are Article •